Call us: 336-253-8766
Email us:  sales@palletrackworld.com

         Contact Us | Hours:  8:00a.m. - 5:00p.m. Eastern
Pallet Rack World | Pallet Racking and Wire Decks | Teardrop Uprights, Beams, Wire Decking
HomeProductsLocations/PricingBrands/Mfg'sUsed Pallet RackInstallation/Services
Recent ProjectsWe Buy Racking | Sell us Your Used Pallet Racking

Pallet Rack World Products | Meco Omaha | Series 3000 Heavy Duty Cantilever Rack | Bar Storage Rack | Pipe Rack
Series 3000 Heavy Duty Cantilever Rack
Meco Omaha Series 3000 Cantilever Rack is designed for heavy duty applications.  Choose from either single sided or double sided cantilever uprights.  The uprights range from 8' high all the way up to 20' high on 2' increments.  The bases on the single sided uprights are either 31'', 37'', 49'', 61'' or 74'' long.  The bases on the double sided uprights are either 53'', 65'', 82'', 106'' or 130'' long.  There are many different weight capacities to choose from.  Choose either straight arms or inclined arms with a lip or no lip.  The arms feature sizes of 12'', 18'', 24'', 30'', 36'', 42'' and 48'', 54'' and 60'' long.  The capacities very depending on the length of the arm.  The shorter the arm, the higher the capacity.  For example the 12'' long arm holds a 3,000lbs capacity.  On the other hand, the 60'' long arm features a 600lbs capacity.

The arms can be used on Series 3,000, 4,000, or 5,000 uprights only.  Capacities are based on an evenly distributed load.
Heavy duty cantilever rack single sided uprights
Series 3000 Heavy Duty Cantilever Rack Uprights
For your normal industrial storage requirements
Series 3000 Heavy Duty Brace Sets
All braces can be used on Series 3000, Series 4000, or Series 5000 Uprights only.
Length of braces is measured from center of upright to center of upright.
Request a Quote, Save up to:
10 
​% OFF
Your first 
Purchase
Heavy Duty Double Sided Cantilever Racking - Meco Omaha
Series 3000 Heavy Duty Cantilever Rack Single Sided Uprights
Pictured Above:  Meco Omaha Series 3000 Single Sided Uprights with bases, arms and braces.
Pictured Above:  Meco Omaha Series 3000 Single Sided Uprights with bases, arms and braces.
Cantilever Rack straight arms through 48'' long have a minimum pitch of 3/8'' per foot to compensate for deflection.  54'' and 60'' straight arms have a minimum pitch of 5/8'' per foot.
Cantilever Rack inclined arms have a pitch of 20 degrees or approximately 4.36'' per foot.
Series 3000 Cantilever Rack Arms
These cantilever rackarms can beused on Series 3000, Series 4000, or Series 5000 Uprights only. Capacities are based on an evenly distributed load.  Note that armlips are not intended to bear any portionof the load.
Braces for Cantilever Racking
cantilever rack arms inclined with lip
Cantilever rack arms straight with no lip
Pictured above:  Cantilever Rack arms - straight with no lip
Pictured above:  Cantilever Rack arms - inclined w/ lip
2012 Pallet Rack World, All rights reserved.

Call to Order:
Email to Order:
Fax to Order:
336-253-8766
sales@palletrackworld.com
336-605-5248
Our Friends

How to Order
Pallet Rack World covers every state in the US Including:  Alabama | Alaska | Arizona | Arkansas | California | Colorado | Connecticut | Delaware| Florida | Georgia | Hawaii | Idaho | Illinois | Indiana | Iowa | Kansas | Kentucky | Louisiana | Maine | Maryland | Massachusetts | Michigan | Minnesota | Mississippi | Missouri | Montana | Nebraska | Nevada | New Hampshire | New Jersey | New Mexico | New York | North Carolina | North Dakota | Ohio | Oklahoma | Oregon | Pennsylvania | Rhode Island | South Carolina | South Dakota | Tennessee | Texas | Utah | Vermont | Virginia | Washington | West Virginia | Wisconsin | Wyoming

​Pallet Rack World carries all of the major pallet rack brands including:  Interlake Mecalux | Unarco | Ridg U Rak | Bulldog Rack | Steelking | Wireway Husky